How to change a simple VPN configuration into TCP trick of your operator(NMDVPN)

 How to change a simple VPN configuration into TCP trick of your operator(NMDVPN)

Guys, here I present a detailed tutorial about configuring any OVPN file that you get with TCP 443 port and convert it into a working trick of your operator. Most probably, you will be able to use the method with Vodafone and Airtel. Because they are the most used operators and TCP port is open in Airtel and Vodafone.

•  working airtel vpn configuration for download(*hot*)

Note: This method will only work with NMD VPN. So download NMD from Google.

First of all, download any VPN file. I would suggest VPNBook as it is evergreen. But if you know any more faster service, then it is up to you. But be sure that is should support TCP 443 protocol and TCP protocol is opened in your region.


Host Configuration

For this, you need to know the opened and working host in your state. I will not tell you here. Now go to hidemyass.com and search for fastest proxy with HTTPS port. This is important as if you will not search HTTPS, the trick will not work.

Then, add these lines in your VPNBook TCP 443 ovpn file.

http-proxy-timeout 9
http-proxy **.**.**.** ****
http-proxy-option AGENT 'Opera/9.80 (J2ME/MIDP; Opera Mini/528.16 (iPhone; U; CPU iPhone OS 3.0 like Mac OS X; en-us; compatible; Googlebot/870; U; en) Presto/2.4.15'
http-proxy-option EXT1 'Host:**.**.**.**/'
http-proxy-option EXT2 'X-Online-Host:**.**.**.**/'

Replace the '*' in front of 'http-proxy' with the proxy from HMA(HidemyAss). Replace the '*' in front of 'Host' and 'X-Online-Host' with the host. Same host in both the lines.

Now save it and use NMD VPN to connect. If not connected successfully, try these troubleshooting tips:


Troubleshooting

1) VPN is connected but can't browse or download:

a) Make sure that you are opening the NMD with administrator privileges in Windows Vista/7/8.
b) Also check if TAP Driver is successfully installed. This problem often occurs in Windows 8.
c) Also make sure that the below lines is mentioned in the config files: "route-method exe" "route-delay 2" without quotes.
d) If problem still persists, then add these lines in your config: "win-sys env" without quotes.

2) VPN gets disconnected after a some seconds:

Add this line in your config file: "reneg-sec 0" without quotes.

After this tutorial, you should now make your own config file and never ask from someone about TCP tricks.  

Don't forget to like if you like this topic.